Designed around 5.5” props for more power than a 5" quad, the Luma 55 is a lightweight, cinematic beast!
With stiff AF 6x8mm arms and 2.5mm main plates, it's the perfect balance between 5" Freestyle and 6" Cinematic cruiser.
With the Luma 55 you can expect more power to lift full size GoPro's, the ability to stick to fast subjects like glue and extended flight times to get those long cinematic lines.
Frame Key features.
- 160G Frame weight (Carbon, Hardware and TPU)
- 245.7mm Wheelbase
- Support for up to 5.5" Props
- Dual 20x20 stacks. (20x20 Maximum support)
- HD Vista / analog compatible.
- Replaceable 6x8mm arms. (single design)
- 16 to 19mm M3 motor mounts.
- 2.5mm Top and Bottom plates.
- 2mm Mid plate
- Vibration dampened main stack mounting.
- Supports all Mini to Nano sized FPV cameras
- 3K Carbon Fibre.
- 12.9 Grade Steel Hardware Bolts.
- 3d Printed Parts Kit.
Pre Built Luma 55 DJI Digital BNF available here
GoPro Vertical Mounts can be found here
We also stock a range of build parts and electronics for the LUMA 55 here
Got questions?
Check out the FAQ page and you'll most likely find the answer there, if not send us a message via the contact page.
-
Complete set of .STL Files can be found on our Thingiverse.
-
View the recommended parts list here.
-
View the Luma 55 build guide here.
Kit Contents:
| Hardware: | Carbon: | ||
| 5x | 28mm Aluminum standoff. | 1x | 2.5mm Top-plate. |
| 3x | 20mm Aluminum standoff. | 1x | 2mm Mid-plate. |
| 14x | Steel M3 12mm. (12.9 grade) | 1x | 2.5mm Bottom-plate. |
| 9x | Steel M3 10mm. (12.9 grade) | 4x | 6x8mm Arms. |
| 7x | M3 Steel Washer. | ||
| 9x | M3 Steel Pressnut. | Extras: | |
| 5x | M3 Silicone soft-mount gummies. | 4x | Zipties. |
| 1x | M5 Steel Clinch Nut. | 2x | Luma 250mm Lipo Straps. |
| 1x |
M5 20mm Flathead Bolt. | 1x | 3mm Foam Battery Pad. |
| 5x | M3 Steel 20mm. (12.9 grade) | ||
| 5x | M2 Steel 20mm. (12.9 grade) | ||
| 5x | M2 Steel Nut | ||
|
TPU parts:
|
|||
| 1x | Front bumper. | ||
| 4x | Arm Bumpers. | ||
| 4x | Arm Wire Protectors. | ||
| 4x |
Mini to Nano FPV camera mounts. | ||
| 1x | Front GoPro Hard mount. | ||
| 1x |
Rear Vista antenna and T mount
|
||
| 1x | Rear SMA antenna and T mount | ||
| 1x | 20x20 M3 stack RX mount. | ||
| 1x | 20x20 M2 stack RX mount. |
