This is the full kit containing everything you need to put together either an analog or digital build.
Including 3d printed parts, Carbon and high quality hardware.
Got questions?
Check out the FAQ page and you'll most likely find the answer there, if not send me a message via the contact page.
Kit Contents:
Carbon:
1x | 2mm Top-plate. |
1x | 2mm Bottom-plate. |
1x | 2mm Mid-plate. |
4x | 4mm Arm. |
1x | 4mm Arm key. |
Hardware:
4x | 26mm Aluminum standoff. |
2x | 20mm Aluminum standoff. |
12x | Steel M3 8mm. (12.9 grade) |
8x | Steel M3 10mm. (12.9 grade) |
4x | Steel M3 20mm. |
8x | M3 Steel Pressnut. |
4x | M3 Silicone soft-mount gummies. |
4x | M2 Steel 8mm bolt. |
16x | M2 Steel 10mm bolt. |
8x | M2 Steel 20mm bolt. |
4x | M2 Steel Nut. |
20x | M2 Steel washer. |
3D Printed parts:
1x | Front FPV Camera mount and bumper. (supports both "micro" and "mini" sized cameras) |
2x | Prop-guard. |
1x | Front GoPro hard-mount. |
1x | Rear GoPro hard-mount with SMA & Immortal T mount. |
1x | 20x20 Rear stack mount. |
4x | M3 Main stack hard-mount. |
4x | M2 Main stack hard-mount. |
1x | M3 Main stack spacer kit |
1x | M2 Main stack spacer kit |
Extras:
1x | 230mm x 20mm Battery strap. |