FPV Worry Free High Performance Waterproofing by BrandanFPV

FPV Worry Free High Performance Waterproofing by BrandanFPV

Developed by BrandanFPV this product has been proven to do some wild things for water protection! Help push your drone to new extents to get the shot when other crafts can’t without being Worry-Free…

There’s never a time when waterproofed electronics don’t come in handy. Whether it’s winter snow, pesky office park sprinklers, the occasional flight through a 1,000-foot waterfall or even a crash in a stream. The Brandon FPV Worry-Free FPV waterproofing kit is your ticket to longer-lasting electronics.

Note: Use at your own risk. LumaQuad does not take any responsibility if you send it through a waterfall and it short-circuits.

Specifications

• 20ml of waterproofing
• 1x Large brush
• 1x Toothpick
• 1x Plastic application stick
• BrandonFPV Stickers

Instruction

1. Tear down all parts so you can easily put Worry-Free FPV on, no need to unsolder.
2. Clean up all surfaces with an air blower, brush, or cloth to avoid dust, oil, moist or any other things that cover it.
3. Apply Worry-Free FPV to all components such as flight controller, VTX, camera boards evenly and slowly. Let dry for 15-20 minutes and then continue to add additional coats as needed to ensure all desired surfaces are covered.
4. To coat FPV camera you can put Worry-Free FPV on camera connector, on-camera case especially on connection between case, and FPV camera focus ring
5. Do not coat wiring harness connectors.
6. Do one side at a time or wait until Worry-Free FPV is dry then move to the other side.