Are you at the right place ?

Are you at the right place ?

Luma 30 Full frame kit

  • Sale
  • Regular price $57.15




Introducing the Luma 30 - the latest addition to our lineup of creator Cinewhoop frames.

Designed not as a replacement for the Luma 3, but as a lightweight performance alternative, still powered by the same 6S setup and able to carry a full-size GoPro, the Luma 30 is the crazy lightweight, super high-performance 3" whoop you've only ever dreamed about.

Based on the same design principles as our Luma 25, with symmetrical bolt patterns on its top and bottom plates allowing it to be built in either standard "puller" or "pusher" configurations, The 30 has the same 15mm slammed deck height for a super low center of gravity while still accommodating enough space in the back for Air Unit 03, Vista or analog VTX.

The Luma 30 frame is designed to be lightweight at only 85g (Frame hardware and prints) and 238g on average (fully built without Gopro), giving it increased flight times and maneuverability over pretty much any other 3" whoop on the planet.

The only downside to this extreme preference comes with durability, not of the carbon and the frame itself, but from the inherent weaknesses of injection-molded guards. This is not to say the 30 can't take hits and crashes, but the guards will break away if you hit anything hard. We personally think this is well worth it, but as an extra measure to make sure our customers love the product as much as we and our team pilots do, we include 5 in every kit and also make them available for next to nothing so you guys can stock up and treat them like a disposable part.

With each replacement guard costing only a couple of bucks and taking less than two minutes to swap over, we're more than happy with the durability trade-off for such performance benefits.

Come on, can any other 3" Whoop do moves like this?



 

 Recommended parts for this build

We stock a range of electronics and build parts for the Luma 30 here

 

Frame Key Features:

  • Symmetrically designed to be built in either "Puller" or "Pusher" configurations.  
  • 85g frame weight. (238g built with no battery or HD cam)
  • 157.5mm wheelbase.
  • 2mm Top plate.
  • 2.5mm Bottom plate.
  • 12x12mm M2 & 16x16mm M3 motor mounting
  • Injection moulded 3" Prop guards.
  • Slammed 15mm stack height.
  • HD Vista / analog compatible.
  • Main 25.5x25.5mm & 20x20 stack support.
  • Rear 20x20 Stack support.
  • Both Mini, Micro and Nano FPV camera mounts included - supporting all fpv cameras from 20-14mm.
  • Both SMA and Vista/ Airunit 03 Rear mount with VTX antenna and Immortal T Style Antenna Mount included.
  • Support for all 3" propellers.
  • Front Standard Gopro mount (suits any Gopro mounting style camera)










Replacement Plastic Guards available here.

Replacement Carbon Parts available here.

Replacement 3d Prints available here.

Download the 3d model .stl files for this kit here.

View the recommended parts list here.

View the kit assembly guide here

 

Got questions?

Check out the FAQ page and you'll most likely find the answer there, if not send us a message via the contact page.

 

Kit Contents:

Carbon: Hardware:
Plastic parts:
1x 2mm Top-plate. 6x M2 15mm Aluminium Standoff. 5x 3" Prop Guards
1x 2.5mm Bottom-plate. 14x Steel M2 8mm. Extras:
TPU Parts: 16x Steel M2 10mm. 2x Zip ties.
2x Mini/Micro Fpv Cam Mounts 4x Steel M2 14mm. 1x LUMA V1 250mm x 16mm Battery strap.
2x Nano Fpv Cam Mounts 4x Steel M2 Nut.
1x Laser cut Battery Pad
1x Front GoPro Style hard-mount. 20x Steel M2 washer.

1x Rear Immortal T & Vista Antenna mount. 1x Steel M4 Flat head 20mm Bolt
1x Rear Immortal T & SMA Antenna mount. 1x Steel M5 Nut.
1x Rear Immortal T & Avatar Antenna mount. 4x Plastic M2 Nut.
1x 25.5x25.5mm Rx Mount.

1x 20x20mm Rx Mount.

4x Landing Pads/Skids

 

Dont forget to tag @lumaquad in any of your posts so we can share them on our socials!